|
|
| 产品展示 |
|
Shell Gadus S1 OG 150/Shell Gadus S1 OG150详细说明 （浏览1400次）
Shell Gadus S1 OG • Suitable Wear Resistance
• Bitumen
Open Gear and Wire Rope Grease
Shell Gadus S1 OG are a range of high viscosity, residual-type (bituminous) lubricants,
which are recommended principally for open gears and cane bearings which require an
adhesive, high load-carrying, EP product. All grades are blends of bitumen, and heavy
mineral based oils, blended in different proportions to suit various applications.
Applications
Shell Gadus S1 OG are recommended for use in
open gears and cane bearings operating with
high loads and low speeds. They may also be
used for lubrication of wire ropes.
Performance Features
Strongly adhesive and resistant to water
washout
Excellent Load Carrying Capacity
Good corrosion resistance
Health & Safety
Shell Gadus S1 OG is unlikely to present any
significant health or safety hazard when properly
used in the recommended application, and good
standards of industrial and personal hygiene are
maintained.
For further guidance on Product Health & Safety
refer to the appropriate Shell Product Safety Data
Sheet.
Advice
Advice on applications not shown on this leaflet
may be obtained from your Shell Representative.
Typical Physical Characteristics
Grade 100 150 200
Colour black black black
Kinematic
Viscosity
@ 100°C mm2
(ISO 3104)
100 150 200
Flash Point
(ASTM D 92) Min
210°C
Min
210°C
Min
210°C
4 Ball Weld
Load
Kg (ASTM D
2596)
min 250 min 250 min 250
Copper
Corrosion
(ASTM D 4048)
1b 1b 1b
Typical Physical Characteristics
These characteristics are typical of current
production. Whilst future production will
conform to Shell's specification, variations in
these characteristics may occur. |
|
|
