|
CENTOPLEX GLP 500/CENTOPLEX GLP500详细说明 （浏览1146次）
CENTOPLEX GLP 500
Fluid multipurpose grease for long-term lubrication
The data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to a reader
with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the selected
product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a sample for testing.
Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all the technical data in this product information at any time without notice.
Klüber Lubrication München KG, a member of the Freudenberg group
Publisher and Copyright: Reprints, total or in part, are permitted if source Klüber Lubrication München KG
Klüber Lubrication München KG is indicated and voucher copy is forwarded. Geisenhausenerstraße 7, 81379 München, Deutschland
+49 89 7876-0, Telefax +49 89 7876-333, klueber.com
Product information 5.578 e Edition 10.03
Article number: 020181 GATE-B/SP
CENTOPLEX GLP 500
• Multipurpose grease for
long-term lubrication
• High pressure absorption
capacity
• Applicable through central
lubrication systems, especially single-line lubrication
systems
Product data
Chemical structure, oil type mineral oil
Chemical structure, thickener lithium soap
Service temperature range*, °C -30 to 100
Colour brown
Density at 20°C [g/cm3
], approx. 0.94
Cone penetration of lubricating greases acc. to
Klein, worked penetration at 25 °C, lower limit
value, [0.1 mm] approx. 700
Cone penetration of lubricating greases acc. to
Klein, worked penetration at 25 °C, upper limit
value, [0.1 mm] approx. 800
Kinematic viscosity of the base oil, DIN 51562
pt. 01, Ubbelohde, 40 °C, [mm2
/s], approx. 110
Kinematic viscosity of the base oil, DIN 51562
pt. 01, Ubbelohde, 100 °C, [mm2
/s], approx. 9.0
Copper corrosion, DIN 51811, (lubricating
grease), 24h/100 °C, degree of corrosion 1 - 100
* Service temperatures are guide values which depend on the lubricant's composition, the intended use and the application
method. Lubricants change their consistency, apparent dynamic viscosity or viscosity depending on the mechano-dynamical
loads, time, pressure and temperature. These changes in product characteristics may affect the function of a component.
Description
CENTOPLEX GLP 500 is a fluid
multipurpose grease for the longterm lubrication at normal temperatures and high loads.
Application
CENTOPLEX GLP 500 was especially designed for friction points
subject to high loads, e.g. rolling
bearings, plain bearings, guides,
threaded spindles and other highly
stressed machine elements.
This universal lubricating grease is
used for the lubrication of highly
loaded, oil-tight spur and bevel
gears (e.g. gear motors, small
gears), worm gears with steel/steel
material combinations and denture
clutches.
CENTOPLEX GLP 500 is also suitable for the lubrication of linear
guides, e.g. in machine tools, as well
as in assembly and conveyor systems equipped with central lubrication installations.
Application notes
CENTOPLEX GLP 500 can be applied through the usual applications
systems (e.g. spatula, grease gun),
or through central lubrication installations and metering systems. The
grease is approved by numerous
manufacturers of central lubricatio |
|
