|
CENTOPLEX CX 4/375 AU/CENTOPLEX CX4/375AU/CENTOPLEX CX 4/375 AU详细说明 （浏览1233次）
CENTOPLEX CX 4/375 AU
High-speed grease for gears
The data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to a reader
with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the selected
product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a sample for testing.
Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all the technical data in this product information at any time without notice.
Klüber Lubrication, a member of the Freudenberg group
Publisher and Copyright: Reprints, total or in part, are permitted if source Klüber Lubrication München KG
Klüber Lubrication München KG is indicated and voucher copy is forwarded. Geisenhausenerstraße 7, 81379 München, Deutschland
+49 89 7876-0, Telefax +49 89 7876-333, klueber.com
Product information 5.638 e Edition 01.08 replace edition 12.03
Article number: 020047 GATE-B/TB
CENTOPLEX CX 4/375 AU
• High-speed grease for gears
• Shear stable
• Good oil separation at low
temperatures
Product data
Base oil mineral oil
Thickener lithium soap
Service temperature range*, [°C]
lower limit value, approx.
upper limit value
-30
120
Color brown
Aspect almost transparent
Texture homogeneous
Cone penetration, DIN ISO 2137,
worked penetration, 25 °C
lower limit value, [0.1 mm]
upper limit value, [0.1 mm]
355
385
Corrosion protection, DIN 51802
(SKF-EMCOR), testing time 1 week, distilled
water, corrosion degree ≤ 1
Oil separation, DIN 51817, 7d/40 °C, [% by wt.] ≤ 7
Flow pressure, DIN 51805, -30 °C, [mbar] ≤ 1400
Drop point, DIN ISO 2176, [°C] ≥ 150
* Service temperatures are guide values which depend on the lubricant's composition, the intended use and the application
method. Lubricants change their consistency, apparent dynamic viscosity or viscosity depending on the mechano-dynamical
loads, time, pressure and temperature. These changes in product characteristics may affect the function of a component. |
|
