Teresstic GTC 32

Premium Turbine Oil

Product Description

Teresstic GTC 32 is the brand name for a super-premium long-service-life turbine oil developed specifically to address the unique problems associated with turbines that operate in cyclic, or peak-load-leveling, service in high-temperature environments.

Certain turbines, both gas and steam, are in non-base-load service in which frequent stops and starts can create an unstable temperature environment that promotes the formation of oxidation by-products, which in turn can plug filters and cause erratic operation of close-tolerance servo valves. Teresstic GTC 32 has been formulated to reduce formation of oxidation by-products and to protect against those that do form.

Features and Benefits

Provides clean, dependable lubrication for extended service periods
Oxidation life significantly greater than that of conventional turbine oils
Exceptional cleanliness per the ASTM D 4310 Sludging and Corrosion Control Test
Fortified with oxidation, rust and foam inhibitors
Incorporates technology that has been proven in millions of hours of excellent field service in the demanding high-temperature environments of GE Frame 7 and 9 turbines

Applications

Teresstic GTC 32 is the primary recommendation for applications that involve cyclic gas turbine operation. It is recommended by ExxonMobil for applications requiring General Electric's severe GEK-32568F standard, as well as DIN 51515 Parts 1and2, and DIN 51524 Part 1.

Typical Properties

TERESSTIC GTC 32
ISO Viscosity Grade	32
Color, ASTM D 1500	0.5
Gravity, °API	34.2
Specific Gravity at 15.6°C (60°F)	0.854
Viscosity
cSt @ 40°C	32.8
cSt @ 100°C	5.8
Viscosity index	100
Flash Point, ºC, ASTM D 92	215
Pour Point, ºC, ASTM D 97	-24
Neutralization Number, ASTM D 974 mg KOH/g	0.10
Water Separability, ASTM D 1401, 54°C, 10 min, ml Oil/Water/Emulsion	40/40/0
Air Release, ASTM D 3427, min	2.0
Foaming Tendency/Stability, ASTM D 892, ml/ml
Sequence I	0/0
Sequence II	10/0
Sequence III	0/0
Rust Protection, ASTM D 665A, Distilled Water	Pass
Rust Protection, ASTM D 665B, Synthetic Sea Water	Pass
Copper Corrosion, ASTM D 130, 3 hrs @ 100°C	1a
Oxidation Life, RPVOT, ASTM D 2272, minutes	1000
Oxidation Life, RPVOT, ASTM D 2272, modified, After Nitrogen blowing 3 liters/hr at 250 ºF, minutes	850

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the applications referred to above and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact office, or via the Internet. This product should not be used for purposes other than the applications referred to above. If disposing of used product, take care to protect the environment.

The Exxon (Esso) logotypes, the Running Tiger, and Teresstic are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.

12-2010

Exxon Mobil Corporation
3225 Gallows Road
Fairfax, VA 22037
1-800-ASK-MOBIL (275-6624)

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.