FUCHS PLANTOHYD N,CP-51415122113,液压油_深圳市旺鸿达润滑油贸易有限公司

深圳市旺鸿达润滑油贸易有限公司
电话：0755-29675629
传真：0755-81472607
手机：13662610386
联系人：欧阳民
网址：www.whd288.com
邮箱：shell2123@126.com
地址：深圳市宝安区龙华街道龙观东路金龙华广场二期金龙阁1307室
邮编：518000

产品分类

产品展示

FUCHS PLANTOHYD N详细说明　（浏览1844次）

FUCHS PLANTOHYD N

Environmentally Friendly HETG Hydraulic Fluids and Lubricating Oils Based on Vegetable Oils

Diagram

Environmentally Friendly HETG Hydraulic Fluids and Lubricating Oils Based on Vegetable Oils

It has been recognized for a number of years now that the use of mineral oil-based lubricants poses certain environmental risks. Leakages, emissions and spillages when handling gear and lubricating oils lead to direct pollution of the surroundings and thus the environment. This fact led FUCHS to develop rapidly biodegradable lubricants based on vegetable oils and synthetic esters.

The PLANTOHYD N series of oils are based on vegetable oils. They represent an environmentally friendly alternative to mineral oil-based hydraulic oils and can be classified as HETG fluids according to ISO/CD 6743-4.

The advantages of PLANTOHYD N are:

Rapidly biodegradable (greater 90 % within 14 days according to CEC-L-33-A-93)
German Water Hazard Class WGK 0, i.e. generally not hazardous for water
Non-toxic, physiologically harmless
Free of heavy metals
Excellent viscosity-temperature behaviour because of their high natural VI
Excellent anti-wear properties
Extremely shear-stable Rapid air release
Minimal foaming
Insoluble in water
Good demulsibility characteristics
Applicable at tank temperatures ranging from - 27 °C to +70 °C

PLANTOHYD N products are fully compatible with all materials usually found in hydraulic systems. The base fluids used in these products are non-toxic. The fluids are free of heavy metals and chlorinated compounds.

Application:

PLANTOHYD N hydraulic oils can be used universally in all hydraulic and general lubricating systems. These pro- ducts should always be used whenever there is a danger of soil or water pollution following a leak or spillage. The greatest potential for such occurrences are in the construction, water, agricultural and forestry industries. The high viscosity index of PLANTOHYD N products give them multigrade characteristics.

We recommend that the miscibility and compatibility of these products with mineral oil-based hydraulic oils should be checked on a case-by-case basis. As stated in ISO/CD ECO, residual quantities of mineral oil should be kept to a minimum by flushing prior to refilling. Compatible internal finishes on tanks should be selected. Paint finishes which are not 2-part epoxy systems can display poor resistance to mineral oil as well as vegetable oils. In general, we recommend the use of stainless steel tanks. "Free" metals, e.g. tin from soldered joints or zinc from galvanized components should be avoided if possible. Filter systems should also be compatible with vegetable oils.

The powerful cleaning effect of these fluids can dislodge large amounts of dirt and contaminants and this can, in turn, shorten the life of filters. System filters should be cleaned or changed after about the first week of use with PLANTOHYD N. The ISO/CD ECO guidelines should also be observed. To maintain optimum reliability, any water which has collected in systems which have been shut-down for longer periods should be drained. Water or moisture problems can be reduced if filtering and drying equipment is fitted to tank breathers. According to ISO/CD ECO, water content during use should be kept below 0.1 %.

Our application engineers will be glad to advise you on:

Experiences with these products
Application possibilities
Material compatibility
Change-over procedures

and service facilities regarding PLANTO products.

Typical data:

PLANTOHYD		32 N	46 N	68 N
Hydraulic oil type acc. to ISO/CD 6743-4 and VDMA 24 658		HETG 32	HETG 46	HETG 68
Characteristics	Unit				Test method
Colour		1	1	1	ASTM D 1500
Kinematic viscosity
at 40 °C	mm²/s	31.6	48.6	69.8	ASTM D 445
at 100 °C	mm²/s	7.4	10.6	13.9	ASTM D 445
Viscosity index		213	215	207	ASTM D 2270
Density at 15 °C	kg/l	0.921	0.924	0.927	ASTM D 1298
Flash point, Cleveland open cup	°C	>270	>270	>270	ASTM D 92
Pour point	°C	– 39	– 36	– 36	ASTM D 97
Copper corrosion	degree of corr.	1a-100A3	1a-100A3	1a-100A3	ASTM D 130
Rust prevention		pass A	pass A	pass A	ASTM D 665
FZG mechanical gear rig test	load stage	> 12	> 12	> 12	DIN 51 354-2

Disclaimer of Liability

深圳市和有限公司： - 手机：13670209168

上一产品： CASTROL Hyspin ZH-M

下一产品： FUCHS PLANTOHYD S

Copyright (C) 2010　深圳市旺鸿达润滑油贸易有限公司　www.whd288.com　All Right Reserved
地址：深圳市宝安区龙华街道龙观东路金龙华广场二期金龙阁1307室　电话：0755-29675629　传真：0755-81472607　联系人：欧阳民
网址：www.whd288.com　E-mail：shell2123@126.com　友情链接：旺鸿达润滑油　粤ICP备16127079号