品牌专区 >> 润滑脂 >> Shell Malleus HDX/Shell Gadus S3 Wirerope T
Shell Malleus HDX/Shell Gadus S3 Wirerope T
| Shell Malleus HDX/Shell Gadus S3 Wirerope T 详细说明 |
| Shell Malleus HDX Shell Gadus S3 Wirerope T • Heavy Duty Protection • High Temperature • Clay Premium Wirerope and Open Gear Grease Shell Gadus S3 Wirerope T is a full EP lubricant developed for the lubrication and protection of open gears, wire ropes and sliding sufaces. The grease is based on high viscosity mineral oils, inorganic soap thickener and carefully selected additives to provide optimum performance Applications • Lubrication of open gears, gear racks, wire ropes and sliding surfaces. • Open gears in rotating furnaces, crushing- , dredger, ball-, rod- and autogenous mills, gear racks in hoisting machinery, etc Performance Features • Excellent anti-wear performance: At working temperatures, speeds and pressures, Shell Gadus S3 Wirerope T forms a protective cushion between the girth gear and pinion teeth • Superb load carrying capacity: Contains10% graphite to reduce tooth contact zone temperatures, reduce gear surface pitting and alleviate ‘stick-slip’ conditions • Adhesiveness: Has very good adhesive properties and is easy to apply on both dry and wet surfaces. • Water repellent: Effectively resists water ‘wash-off’. • Corrosion protection: Protects metal surfaces from corrosion in hostile environments such as salt water conditions. Repels dirt and dust Health & Safety Shell Gadus S3 Wirerope T is unlikely to present any significant health or safety hazard when properly used in the recommended application, and good standards of industrial and personal hygiene are maintained. After skin contact, wash immediately with soap and water. For further guidance on Product Health & Safety refer to the appropriate Shell Safety Data Sheet. Protect the environment Take used product to an authorised collection point. Do not discharge into drains, soil or water. Advice Advice on applications not covered in this leaflet may be obtained from your Shell Representative Shell Lubricants Page 2 of 2 10/06/2010 Technical Data Sheet Typical Physical Characteristics Shell Gadus S3 Wirerope T Cone Penetration Worked @ 25°C 0.1mm (IP 50/ASTM-217) 350 Base Oil, kinematic viscosity @ 40°C cSt @ 100°C cSt (IP 71/ASTM-D445) 2000 50 Water Washout test % (ASTM D-1264) 5 Four Ball test: Welding load, N 5400 Corrosion properties SKF Emcor, distillate water SKF Emcor WWO distillate water Pass Pass Temperature range (temporary) °C -10/+150 (200) These characteristics are typical of current production. Whilst future production will conform to Shell’s specification variations in these characteristics may occur. |
