品牌专区 >> 耐高温润滑脂 >> SHELL GADUS S5 V42P 2.5/Shell Nerita HV
SHELL GADUS S5 V42P 2.5/Shell Nerita HV
| SHELL GADUS S5 V42P 2.5/Shell Nerita HV 详细说明 |
| SHELL GADUS S5 V42P 2.5 Shell Gadus S5 V42P • Extra Protection & Long Life • High Speed • Lithium Advanced Extreme Pressure Grease for High Speed Bearings Customer Benefits Cost Savings via • Lower seal costs that result from the use of advanced XHVI base oils instead of PAOs and/or esters that are more compatible with seal materials allowing lower cost seals to be used while obtaining the same extended life. • Lower maintenance costs due to the extra long service life that can be obtained in electrical motors & high speed bearings that result from the use of an appropriate thickener and selected additive technology, developed & tested by Shell • Reduced cost due to the excellent performance in high speed machine tool bearings that usually employ far more expensive greases from specialist companies (eg Kluber Staburags), this performance results from the leading edge technology that comes from investing continuously in Grease R&D Peace of Mind via • The proven nature of the technology, that is evident from the approval by leading companies such as SNR, ABB, in a range of applications which grows every year. • The knowledge that Shell is in FULL control from Research & Development to manufacture & quality assurance in our own ISO approved plants, which are regularly audited and passed by quality conscious customers buying Shell Gadus S5 V42P. • Availability of Shell expertise, to assist in safely developing the cost savings available from the wide range of Shell products • No Health & Safety concerns, as Shell Shell Gadus S5 V42P is free from any harmful component vs EC requirements. Convenience via • Guaranteed suitable lubrication of equipment world-wide, as this product is part of the International SeaShell range of products, which can be found throughout the world, and is actually used for electrical motor bearings in Shell oil rigs and refineries world-wide. Key Industry Sectors & Applications z General Engineering, Autocomponents Electrical motors, high speed bearings (loaded & unloaded), high speed machine tool bearings, bearings of industrial fans, wheel bearings,.. with a n.Dm factor above 250,000. Operating Temperature Range Shell Gadus S5 V42P is recommended for use over the temperature range -30°C to 130°C Health & Safety Shell Gadus S5 V42P is unlikely to present any significant health or safety hazard when properly used in the recommended application, and good standards of industrial and personal hygiene are maintained. For further guidance on Product Health & Safety refer to the appropriate Shell Material Safety Data Sheet Advice For advice on applications not covered in this leaflet may be obtained from your Shell Representative Typical Physical Characteristics Shell Gadus Grease S5 V42P NLGI Consistency 2.5 Colour Light brown Soap Type Lithium Base Oil (type) Special Mineral (synthetic like) Kinematic Viscosity @ 40°C cSt 100°C cSt (IP 71/ASTM-D445) 42 8 Dropping Point °C (IP 322/ASTM-D566-76) 180 Cone Penetration Unworked @ 25°C 0.1 mm (IP 50/ASTM-D217) 255 These characteristics are typical of current production. Whilst future production will conform to Shell's specification variations in these characteristics may occur. |
