品牌专区 >> 耐高温润滑脂 >> Shell Gadus S5 U100KD/Shell Darina XL 102 Moly
Shell Gadus S5 U100KD/Shell Darina XL 102 Moly
| Shell Gadus S5 U100KD/Shell Darina XL 102 Moly 详细说明 |
| Shell Gadus S5 U100KD Advanced Multipurpose Grease with Solids Shell Gadus S5 U100KD is an all season full synthetic grease. The superior high temperature capability of Shell Gadus S5 U100KD grease ensures dependable lubrication in a wide range of operating temperatures from a maximum of about 170 °C down to -45 °C. APPLICATIONS Shell Gadus S5 U100KD grease has been designed for optimum year round protection. Its synthetic formulation ensures performance in extreme temperatures in severe applications where No Compromise is acceptable PERFORMANCE BENEFITS Shell Gadus S5 U100KD grease provides the following additional benefits and features: • Superior High Temperature Performance and Oxidation Resistance - extremely stable at high temperatures. It won't melt like conventional soap based greases and also exhibits superior resistance to oxidation ... this helps ensure long grease and equipment life. • Excellent Load Carrying Ability - formulated with non-leaded extreme pressure additives and moly disulphide to provide excellent load carrying properties – which minimize your equipment wear. • Excellent Low Temperature Performance – outstanding low temperature mobility and dispensability – reducing inventory changes while ensuring year round protection. • Outstanding resistance to water washout. It leaves a tenacious film which can often result in extended lubrication intervals and reduced operating costs. Previous Name: Previous Name: Shell Darina XL 102 Moly • Extreme Low Temperature • Centralized Systems • Clay Technical Data Sheet Shell Lubricants Page 2 of 2 17/01/2012 Typical Physical Characteristics Shell Gadus ASTM Method S5 U100KD NLGI Grade 1 Color Grey Appearance Smooth Dropping Point °C D2265 >280 Thickener Type Clay (1) Worked Penetration 60 strokes @ 25°C D217 320 - 340 Estimated Operating Range °C -45 to 170 Minimum (2) Dispensing Temperature, °C -40 Mobility @ -35 °C, g/min @ -40 °C, g/min USS DM 43 3.8 2.0 Low Temperature Torque, N.m. D4693 1.3 Base Oil Viscosity, cST @ 40°C D445 100 Oil Separation, % mass @ 25°C, 24h D1742 2.0 Oil Separation , % mass @ 40°C, 18h IP121 1.8 EP Tests 4 ball, Weld Load, kg 4 ball, Load Wear Index 4 ball, Wear Scar, mm D2596 D2596 D2266 315 70 0.6 Timken OK Load, kg D2509 20.4 Water Wash Out, % Loss @ 79°C D1264 2.9 Corrosion Tests 48 hour @ 52°C Fafnir Fretting, mg D1743 D4170 Pass 1.2 (1) previously referred to as “Microgel” (2) vary with design of grease gun or centralized system These physical characteristics are typical of current product |
