品牌专区 >> 耐高温润滑脂 >> Shell Gadus S2 OGH 0/Shell Gadus S2 OGH0
Shell Gadus S2 OGH 0/Shell Gadus S2 OGH0
| Shell Gadus S2 OGH 0/Shell Gadus S2 OGH0 详细说明 |
| Shell Gadus S2 OGH High Performance Open Gear and Wire Rope Grease Shell Gadus S2 OGH greases are designed for use in high temperature, open gear applications such as rotary cement kiln gears. The products are designed to be sprayed onto the kiln gears. Shell Gadus S2 OGH greases are based upon an inorganic non-soap thickener dispersed in a high viscosity base oil containing graphite. Applications Typical applications for Shell Gadus S2 OGH are: High temperature open gears Rotary cement kiln gears Care should be taken to ensure that Shell Gadus S2 OGH offer the required base oil viscosity under the operating conditions encountered. These will be defined by the gear speeds, load, temperature etc. Performance Features High melting point The inorganic thickener has a high melting point and performance is limited only by the properties of the oil and the additive components. Excellent pumpability Shell Gadus S2 OGH can be readily pumped to allow easy distribution via spray systems onto the gear teeths. Excellent load carrying capacity under severe conditions Grease contains selected solid additives to ensure excellent resistance to shock loading. Proven performance in the large Cement plants Very successful track records in some of the largest Cement plants. Re-greasing Intervals For bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed. Approvals and Recommendations The Shell Gadus OGH range has been listed by the following OEMs : Ferry-Capitain FLSmidth Danieli Previous Name: Shell Malleus Grease OGH • Good Wear Resistance • High Temperature • Clay Technical Data Sheet Shell Lubricants Page 2 of 2 16/03/2011 Typical Physical Characteristics These characteristics are typical of current production. Whilst future production will conform to Shell's specification variations in these characteristics may occur. conform to Shell's specification variations in these characteristics may occur. Health & Safety Shell Gadus S2 OGH Greases are unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained. Prolonged or repeated contact with the skin should be avoided. For further guidance on product Health and Safety refer to the appropriate Shell Product Safety Data Sheet. Advice Advice on applications not covered in this leaflet may be obtained from your Shell Representative Shell Gadus Grease S2 OGH S3 OGH S4 OGH NLGI Consistency 0/00 0/00 0/00 Colour Dark grey Dark grey Dark grey Soap Type Bentonite clay Bentonite clay Bentonite clay Base Oil (type) Mineral Part Synthetic Part Synthetic Solid Lubricant Graphite 15% Graphite 15% Graphite 15% Base Oil Viscosity @ 40°C cSt 100°C cSt (IP 71/ASTM-D445) 1000 42 2000 65 4000 90 Cone Penetration Worked @ 25°C 0.1 mm (IP 50/ASTM-D217) 395 390 390 Dropping Point °C (IP 132/ASTM-D566-76) Over 250 Over 250 Over 250 Four Ball Test Kg (IP 239) 800 800 800 FZG Scuffing Test A/2.76/50 (ISO 14635-3) 12 Pass tbd tbd |
