| MobilPRIMOL352/Mobil PRIMOL352/Mobil PRIMOL 352/美孚PRIMOL352/美孚PRIMOL 352 详细说明 |
PRIMOL 352 MobilPRIMOL352/Mobil PRIMOL352/Mobil PRIMOL 352/美孚PRIMOL352/美孚PRIMOL 352 PRIMOL 352的生产超过了药典对纯度的要求，由于其出色的化学惰性，它演示了更好的颜色和氧化稳定性优于大多数矿物油和植物油，在受控条件下存放和使用时。 ExxonMobil白油根据埃克森美孚产品质量管理系统，EN ISO 9000或同等标准进行生产和控制。
应用 热塑性塑料 PRIMOL 352被推荐为通用和高抗冲聚苯乙烯食品包装级增塑剂。的Primol 352是推荐用于作为外部润滑剂，非增塑的PVC。的Primol 352是惰性保护进程聚丙烯的催化剂载体。它也可以作为颜料粉末分散在母炼胶混炼。 弹性体和粘合剂 的Primol 352是用于生产食品接触或医用橡胶，如EPDM橡胶或丁基橡胶的文章。它特别适用于热塑性弹性体（TPE）的扩展名，如SBS，SEBS或SEPS。PRIMOL 352也推荐为热熔胶配方卫浴产品中使用。 化妆品和药品 PRIMOL 352在制药行业有许多行之有效的应用，像的通便果冻和药膏，也建议作为一个组成部分的许多化妆品，如面霜和身体乳液。 进一步的详细信息可在我们的公告白油化妆品。 （*）用户必须检查遵守适用的法规。作为一个例子，在此出版物的日期的Primol 352可以用来作为食品添加剂在美国适用的FDA法规，而它不能被用于直接作为食品添加剂在欧盟成员国 性能和规格 美国FDA 21 CFR 172.878和21 CFR 178.3620（a）条，白矿油 号：232-455-8 INCI名称：石蜡Liquidum的（欧洲） CTFA词典名称（美国）：矿物油 财产 测试方法 典型 最小 最大 健康与安全 储存和搬运 更多信息
1-2011 美孚润滑剂和特种欧洲 已力求审慎考虑在编制本资料。在允许的范围内适用的法律，所有担保和/或陈述，明示或暗示的信息的准确性，否认，并接受相同的准确性或完整性不承担任何责任。 版权所有©2001至2013年埃克森美孚公司。保留所有权利。 Primol 352 Primol 352 is manufactured to exceed the purity requirements of the Pharmacopoeias Due to its superior chemical inertness, it demonstrates better colour and oxidative stability than most mineral and vegetable oils, when stored and used under controlled conditions. ExxonMobil White Oils are produced and controlled according to the ExxonMobil Product Quality Management System, EN ISO 9000 or equivalent standard.
Applications Thermoplastics Primol 352 is recommended as a food packaging-grade plasticizer in general purpose and high impact polystyrene. Primol 352 is recommended for use as an external lubricant for non-plasticized PVC. Primol 352 is an inert and protective catalyst carrier for polypropylene processes. It can also serve as a pigment powder dispersant in master batch compounding. Elastomers and Adhesives Primol 352 is used for producing food-contact or medical rubber articles such as EPDM or butyl rubber. It is particularly well suited for the extension of Thermoplastic Elastomers (TPE), such as SBS, SEBS or SEPS. Primol 352 is also recommended for Hot-Melt Adhesives formulations used in sanitary products. Cosmetics and Pharmaceuticals Primol 352 has many well-established applications in the pharmaceutical industry, like laxative jellies and ointments, and is also recommended as a component for many cosmetic products, such as creams and body lotions. Further detailed information is available in our bulletin White oils for Cosmetics. (*) User must check compliance with applicable regulations. As an example, at the date of this publication, Primol 352 can be used as a food additive in USA subject to applicable FDA regulations, while it cannot be used as a direct food additive in European Union Member States Properties and Specifications USA FDA, 21 CFR 172.878 and 21 CFR 178.3620(a), White Mineral Oil EINECS number: 232-455-8 INCI name (Europe): Paraffinum Liquidum CTFA Dictionary name (USA): Mineral Oil Property Test Method Typical Min Max Health and Safety Storage and Handling Further Information
1-2011 ExxonMobil Lubricants & Specialties Europe Every care has been taken in the preparation of this information. To the extent permitted by applicable law, all warranties and/or representations, express or implied, as to the accuracy of the information are disclaimed, and no liability is accepted for the accuracy or completeness of the same. Copyright © 2001-2013 Exxon Mobil Corporation. All rights reserved. |
