品牌专区 >> 开式齿轮油 >> Shell Gadus S1 OG 150/Shell Gadus S1 OG150
Shell Gadus S1 OG 150/Shell Gadus S1 OG150
| Shell Gadus S1 OG 150/Shell Gadus S1 OG150 详细说明 |
| Shell Gadus S1 OG • Suitable Wear Resistance • Bitumen Open Gear and Wire Rope Grease Shell Gadus S1 OG are a range of high viscosity, residual-type (bituminous) lubricants, which are recommended principally for open gears and cane bearings which require an adhesive, high load-carrying, EP product. All grades are blends of bitumen, and heavy mineral based oils, blended in different proportions to suit various applications. Applications Shell Gadus S1 OG are recommended for use in open gears and cane bearings operating with high loads and low speeds. They may also be used for lubrication of wire ropes. Performance Features Strongly adhesive and resistant to water washout Excellent Load Carrying Capacity Good corrosion resistance Health & Safety Shell Gadus S1 OG is unlikely to present any significant health or safety hazard when properly used in the recommended application, and good standards of industrial and personal hygiene are maintained. For further guidance on Product Health & Safety refer to the appropriate Shell Product Safety Data Sheet. Advice Advice on applications not shown on this leaflet may be obtained from your Shell Representative. Typical Physical Characteristics Grade 100 150 200 Colour black black black Kinematic Viscosity @ 100°C mm2 (ISO 3104) 100 150 200 Flash Point (ASTM D 92) Min 210°C Min 210°C Min 210°C 4 Ball Weld Load Kg (ASTM D 2596) min 250 min 250 min 250 Copper Corrosion (ASTM D 4048) 1b 1b 1b Typical Physical Characteristics These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics may occur. |
