ISOFLEX PDP
10, 38, 40, 48, 61 A Fernschreib. K, 65, 94, 300
Synthetic long-term oils
Product Information 5.324 Edition 11.00, replaces edition 04.00
Article number: 025006, 025007, 025008, 025010, 025011, 025012, 025014, 025016, en GS/ GA
Description
ISOFLEX PDP oils are synthetic
long-term oils based on ester oil.
They show a good viscosity-temperature
behavior, a high flash
point, a low pour point, good ageing
and oxidation stability as well
as corrosion protection. Compared
to mineral oils, they hardly change
their viscosity at low or high temperatures
thus ensuring less
decrease in performance and
reduced power consumption.
Application
ISOFLEX PDP oils are ideally suited
for lubrication points which have to
meet high demands and show a
long service life. They can be used
for rolling bearings subject to high
thermal and static loads, even at
high speeds, plain bearings, guides
in communication equipment, radioprobes,
precision and measuring
instruments, control systems,
turbines, synchronous motors and
elements with exacting tolerance in
the fields of telecommunication,
data systems and cryotechnology.
Furthermore, ISOFLEX PDP oils are
suitable for the impregnation of
sintered bearings and sintered
compacts.
ISOFLEX PDP 61 A Fernschreib. K
has been especially designed for
mechanically actuated friction points
in teletypewriters.
Application notes
ISOFLEX PDP oils are neutral
towards metals. Due to the great
variety of different elastomers and
plastics, their compatibility with
these oils has to be checked prior to
series application.
ISOFLEX PDP oils are miscible with
mineral oils. However, we recommend
removing the used oil from
the lubrication point in order to fully
utilize the performance of these oils.
Minimum shelf life
The minimum shelf life in the closed
original container in a dry place is
approx. 60 months.
Pack sizes
1 l canister
20 l canister
Current material safety data sheets
can be downloaded from our
website klueber.com or
requested from Klüber Lubrication.
ISOFLEX PDP oil
• Synthetic long-term oils
• Wide service temperature
range
• Low pour point
• Good viscosity-temperature
behavior
• Oxidation and ageing stability
• Good corrosion protection

ISOFLEX PDP
10, 38, 40, 48, 61 A Fernschreib. K, 65, 94, 300
Synthetic long-term oils
The data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to a
reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the
selected product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a sample
for testing. Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all the technical data in this product information at any time
without notice.
Klüber Lubrication, a member of the Freudenberg Group
Publisher and Copyright: Reprints, total or in parts, are permitted if source Klüber Lubrication München KG
Klüber Lubrication München KG is indicated and voucher copy is forwarded. Postfach 70 10 47, D-81310 München
Tel. (0 89) 78 76-0, Telex 5 23 131, Telefax (0 89) 78 76-333
Product data:
Product Colour, aspect Density
DIN 51 757
(g/ml)
at 20 °C
approx.
Service
temperatur
e
range*,
approx.
Kinematic
viscosity
DIN 51 562
part 01
(mm2/s),
at °C,
approx.
40 100
Viscosity
index
DIN ISO
2909
approx.
Flash
point
DIN ISO
2592
°C
approx.
Pour
point
DIN ISO
3016
°C
approx.
ISOFLEX PDP 10 yellowish, clear 0.92 – 65 to 100 8 2.3 110 200 – 70
ISOFLEX PDP 38 yellowish, clear 0.92 – 65 to 100 12 3.2 125 200 – 70
ISOFLEX PDP 40 yellowish, clear 0.92 – 50 to 100 19 5 230 200 – 55
ISOFLEX PDP 48 yellowish, clear 0.92 – 45 to 100 30 7.9 240 200 – 50
ISOFLEX PDP 61
A Fernschreib. K red, clear 0.92 – 45 to 100 50 14 200 180 – 50
ISOFLEX PDP 65 yellowish, clear 0.92 – 50 to 100 68 17 245 200 – 55
ISOFLEX PDP 94 yellowish, clear 0.93 – 40 to 100 120 28.2 250 200 – 45
ISOFLEX PDP 300 yellowish, clear 0.93 – 30 to 100 350 72.3 250 180 – 35
* Service temperatures are guide values which depend on the lubricant’s composition, the intended use and the application method. Lubricants change their consistency, apparent dynamic
viscosity or viscosity depending on the mechano-dynamical loads, time, pressure and temperature. These changes in product characteristics may affect the function of a component.