美孚润滑脂底盘LBZ

汽车用润滑脂

产品描述

LBZ美孚底盘润滑脂是一种半流体润滑脂，合成油的基础上的一致性组NLGI 00。它是专门开发用于商用车辆的中央润滑系统。该产品中含有的抗氧化剂，腐蚀抑制剂，极压和抗磨损添加剂。由于其特殊的配方和半流质的一致性底盘润滑脂，美孚LBZ即使在非常低的温度下表现出优异的流动和在长pipelinesThe油膜附着良好，不流失，即使在停工。有快速流润滑点。良好的保护作用，防止生锈，还涵盖了使用机箱上的润滑点'传播'盐和相关的危险生锈。美孚底盘润滑脂LBZ NBR，ACM，FKM，只要这些适合的工作温度与密封件相容。

特点和优点

特点	优点及潜在效益
集中系统中的泵送性好，即使在低温下	潜在的合理化到一个产品
集中润滑系统设计	降低运营成本相比，由于较低的维护成本和经济使用手工润滑
在重负荷或冲击负荷和振动，降低了磨损。出色的抗磨损性能	良好的设备的可靠性和可用性
良好的防锈和防腐蚀保护和抗水淋	增强设备的保护和良好的润滑作用，即使在有水存在
控制放油	平衡的润滑性能，延长了使用寿命

应用

埃克森美孚推荐使用于：

中央润滑系统使用半流体润滑脂商业车辆-50°C和100°C 以下厂家的半流体润滑脂系统：

威利·沃格尔AG，柏林（-25°C）
梅赛德斯 - 奔驰（表264.0半流体润滑脂）。

规格与认可

美孚底盘润滑脂LBZ有以下制造商认可
梅赛德斯 - 奔驰	表264.0
MAN	MAN 283李-P 0/000

典型属性

美孚润滑脂底盘LBZ
NLGI等级	00
基础油粘度40°C，ASTM D 445，CST	40
稠化剂类型	锂
颜色	绿色
工作锥入度，25ºC，ASTM D 217	400-430
滴点，C，D 2265	> 160
四球焊接负荷，N，DIN 51350-4	800
防腐蚀保护，埃姆科，ISO 11007	0-0
流量压力测试@ -35℃，百帕，DIN 51805	60
温度范围，连续运行	-40°C至+100°C

健康与安全

根据现有资料显示，该产品预计不会对健康产生不利影响，使用时的用途和材料安全数据表（MSDS）中提供的建议遵循。MSDS可根据要求通过您的销售联络办事处，或通过互联网。此产品不应该被用于其拟定用途以外的其他用途。如果处理用过的产品，照顾，以保护环境。

美孚字型，飞马设计和底盘润滑脂美孚LBZ是埃克森美孚公司或其子公司之一，其附属公司的注册商标。

5-2011

埃索ITALIANA SRL
通过城堡德拉妮拉25
00148，罗马，意大利 800.011723 http://exxonmobil.com

典型性质是典型的获得正常生产公差，并不构成一个规范。在正常生产过程中，在不同的调配是可以预期的变动，并不影响产品性能。此处包含的信息如有变更，恕不另行通知。可能并非所有产品均在当地有售。欲了解更多信息，请联系您当地的埃克森美孚接触或访问exxonmobil.com
埃克森美孚公司是由众多的子公司和附属公司，包括埃索，美孚，埃克森美孚公司的名称。本文档中的任何内容都不是为了覆盖或取代地方实体的公司的独立性。地方行动和问责的责任仍然与当地埃克森美孚附属实体。

Mobil Chassis Grease LBZ

Automotive Grease

Product Description

Mobil Chassis Grease LBZ is a semi-fluid grease based on synthetic oils in the consistency group NLGI 00. It was specifically developed for central lubrication systems for commercial vehicles. The product contains anti-oxidants, corrosion inhibitors, extreme pressure and anti-wear additives. Due to its special formulation and semi-fluid consistency, Mobil Chassis Grease LBZ exhibits excellent flow even at very low temperatures and in long pipelinesThe oil film adheres well and does not run off, even during stoppages. There is rapid on-flow to the greasing points. The good protection against rust also covers the use of ‘spreading’ salt and the related danger of rust on the lubrication points of the chassis. Mobil Chassis Grease LBZ is compatible with seals made of NBR, ACM and FKM, as long as these are suitable for the operating temperatures.

Features and Benefits

Features	Advantages and Potential Benefits
Good pumpability in centralised systems even at low temperatures	Potential to rationalise onto one product
Designed for centralised lubrication systems	Reduced operating costs compared to greasing by hand due to lower maintenance costs and economic usage
Reduced wear under heavy or shock loading and vibration. Excellent anti-wear performance	Good equipment reliability and availability
Good protection against rust and corrosion and resistance to water washout	Enhanced equipment protection and good lubrication even in presence of water
Controlled oil release	Balanced lubrication properties for longer service life

Applications

Recommended by ExxonMobil for use in:

Central lubrication systems using semi-fluid greases in commercial vehicles–50°C and 100°C

The semi-fluid grease systems of the following manufacturers:

Willie Vogel AG, Berlin (to -25°C )
Mercedes Benz (Sheet 264.0 Semi-Fluid Greases).

Specifications and Approvals

Mobil Chassis Grease LBZ has the following builder approvals
Mercedes Benz	Sheet 264.0
MAN	MAN 283 Li-P 0/000

Typical Properties

Mobil Chassis Grease LBZ
NLGI Grade	00
Base Oil Viscosity @ 40°C, cSt, ASTM D 445	40
Thickener Type	Lithium
Colour	Green
Penetration, Worked, 25 ºC, ASTM D 217	400-430
Dropping Point, D 2265, C	›160
4-Ball Weld Load, N, DIN 51350-4	800
Corrosion protection, EMCOR, ISO 11007	0-0
Flow Pressure Test @ -35°C, hPa, DIN 51805	60
Temperature range, continuous operation	-40°C to +100°C

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact office, or via the internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

The Mobil logotype, the Pegasus design and Mobil Chassis Grease LBZ are trademarks of ExxonMobil Corporation, or one of its subsidiaries.

5-2011

Esso Italiana s.r.l.
Via Castello della Magliana 25
00148, Roma, Italia

800.011723
http://exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.