美孚HTR，HTM，高温超导和HTF

油脂

产品描述

美孚HTR，HTM，高温超导和HTF高性能极压润滑脂，具有优异的抗水的污染条件钢厂的典型，表面采矿，公路和越野条件。此外，美孚HTR，HTM，高温超导，导热油，制定具有超强的耐腐蚀性。美孚HTM和高温气冷堆随着中央系统中，更能够提供良好的分配特性的配方提供了良好的耐水和耐腐蚀性。复合锂皂基与先进的添加剂的组合，提供了高温性能。美孚导热油提供阻燃蓖麻油和热轧带钢轧机操作。

美孚HTR，HTM，HTS和导热油润滑脂，主要推荐用于润滑轴承，齿轮，凸轮弹流润滑（EHL）的要求决定重大粘度的贡献。油脂流磨水，继续进行润滑，并帮助形成了强大的密封，以抵御海水入侵。当自由水进入轴承，润滑脂保持一致性。他们的EP性能和高油粘度，有助于减少磨损，使它们特别适用于重型冲击载荷。磨损少，更换故障轴承的维护成本会更低。它们也可以用在中心润滑脂分配系统一致的表观粘度计算。

特点和优点

美孚HTR，HTM，HTS和导热油润滑脂美孚品牌的产品，已经获得了享誉全球的创新和性能卓越的领导成员。美孚HTR，HTM，高温超导和HTF润滑脂产品由埃克森美孚配方专家设计，并通过我们在世界各地的技术支持人员的支持。

美孚HT产品是专为满足客户的要求，为重型产品具有优良的抗水，高温和凝聚力和粘接性能。这些润滑脂提供了以下特性与潜在效益：

特点	优点及潜在效益
优良的耐高EHL粘度和精选添加剂穿重仓组件	减少意外停机和减少设备的重置成本
很棒能够防止水侵入密封轴承，在水的存在下保持一致性	较少的轴承故障所造成的水体污染，降低维护和更换成本
优异的耐腐蚀性能	轴承很好的保护，减少维护和运营成本
在高温下，在存在对水喷雾的凝聚力，粘附性和粘合性优异的润滑脂的	更好地留在恶劣环境中的性能和延长再润滑潜力
泵送性好，在低到中等温度	可以用在集中润滑脂分配系统

应用

美孚HTR主要是为了解决低温泵送性挑战。美孚HTM额外的保护，防止海水入侵提供了良好的泵送性。美孚高温超导NLGI 2级润滑脂可以使用，提供了最大的轴承的润滑性能。美孚导热油提供阻燃蓖麻油和热轧带钢轧机操作。

美孚HTR，HTM，高温超导和主要设计用于导热油润滑脂润滑的轴承，齿轮，凸轮，需要高粘度基础油。这种重型的应用程序包括：

钢轧机轴承，
非公路机车车辆
露天开采拖线，挖掘机，钻头和长途车

典型属性

	美孚HTR	美孚HTM	美孚高温超导	美孚导热油
NLGI等级	0.5	1.5	2	1.0
稠化剂类型	锂复合	锂复合	锂复合	锂复合
色彩，视觉	黑色	黑色	黑色	黑色
工作锥入度，25ºC，ASTM D 217度，mm/10	340	295	280	325
滴点，ºC，ASTM D 2265	280	280	295	190
油的粘度，ASTM D 445 CST @ 40ºC	320	320	680	320
CST @ 100℃	24	24	37	24
穿透一致性变化，侧倾稳定性，ASTM D 1831度，mm/10	-1	-1	-1	-1
水喷雾关，ASTM D 4049，％重量损失	-----	-----	-----	-----
水冲蚀，ASTM D 1264，％重量损失	-----	5.5	5.5	-----
四球焊接点，ASTM D 2596公斤	315	315	315	315
四球磨损，ASTM D 2266，毫米疤痕	0.5	0.5	0.5	0.5

健康与安全

根据现有资料显示，该产品预计不会对健康产生不利影响，使用时的用途和材料安全数据表（MSDS）中提供的建议遵循。MSDS可根据要求通过你的销售合同办公室，或通过互联网。此产品不应该被用于其拟定用途以外的其他用途。如果处理用过的产品，照顾，以保护环境。

美孚字型，飞马图样及Delvac MX均为埃克森美孚公司或其子公司之一，其附属公司的注册商标。

埃克森美孚公司
3225绞刑架道
弗吉尼亚州费尔法克斯22037 -800-ASK MOBIL（275-6624）

典型性质是典型的获得正常生产公差，并不构成一个规范。在正常生产过程中，在不同的调配是可以预期的变动，并不影响产品性能。此处包含的信息如有变更，恕不另行通知。可能并非所有产品均在当地有售。欲了解更多信息，请联系您当地的埃克森美孚接触或访问exxonmobil.com
埃克森美孚公司是由众多的子公司和附属公司，包括埃索，美孚，埃克森美孚公司的名称。本文档中的任何内容都不是为了覆盖或取代地方实体的公司的独立性。地方行动和问责的责任仍然与当地埃克森美孚附属实体。

Mobilgrease HTR, HTM, HTS and HTF

Grease

Product Description

Mobilgrease HTR, HTM, HTS and HTF are high performance Extreme Pressure greases with exceptional resistance to the water contamination conditions typical of steel mill, surface mining, and off-highway conditions. Additionally, Mobilgrease HTR, HTM, HTS, and HTF are formulated with superior corrosion resistance. Mobilgrease HTM and HTR provide good water and corrosion resistance along with formulations more capable of providing good dispensing characteristics in central systems. The combination of the lithium complex soap with an advanced additive system provide high temperature performance properties. Mobilgrease HTF provides fire retardancy for castor and hot strip mill operations.

Mobilgrease HTR, HTM, HTS and HTF greases are primarily recommended for the lubrication of bearings, gears, and cams where the elastohydrodynamic lubrication (EHL) requirements dictate significant viscometric contribution. The greases shed mill water, continue to lubricate and aid in forming a strong seal to resist water intrusion. When free water enters a bearing, the greases maintain consistency. Their EP properties and high oil viscosity help reduce wear, making them especially applicable for heavy shock loads. With less wear, maintenance costs for replacing failed bearings will be lower. They can also be used in central grease dispensing systems consistent with apparent viscosity calculations.

Features and Benefits

Mobilgrease HTR, HTM, HTS and HTF greases are leading members of the Mobilgrease brand of products, which has gained a worldwide reputation for innovation and performance excellence. Mobilgrease HTR, HTM, HTS and HTF grease products are designed by ExxonMobil formulation technologists and backed by our worldwide technical support staff.

Mobilgrease HT products were designed specifically to meet the requirements of customers for heavy-duty products with excellent: resistance to water, high temperature and with cohesive and adhesive properties. These greases offer the following features and potential benefits:

Features	Advantages and Potential Benefits
High EHL viscometrics and selected additives for excellent resistance to wear for heavily loaded components	Less unexpected downtime and reduced equipment replacement costs
Excellent ability to seal bearings against water intrusion, and to maintain consistency in the presence of water	Fewer bearing failures caused by water contamination with reduced maintenance and replacement costs
Exceptional corrosion resistance	Very good bearing protection for reduced maintenance and operating costs
Excellent grease cohesion, adhesion and tackiness at high temperatures and in presence of water spray	Better stay-put properties in tough environments and extended re-lubrication potential
Good pumpability at low to moderate temperatures	Can be used in centralised grease distribution systems

Applications

Mobilgrease HTR is primarily intended to address low temperature pumpability challenges. Mobilgrease HTM provides good pumpability with additional protection against water intrusion. Where an NLGI Grade 2 grease can be used, Mobilgrease HTS provides maximum bearing lubrication performance. Mobilgrease HTF provides fire retardancy for castor and hot strip mill operations.

Mobilgrease HTR, HTM, HTS and HTF greases are designed primarily for the lubrication of bearings, gears, and cams, which require high viscosity base oil. Such heavy-duty applications include:

Steel mill bearings,
Off-highway rolling stock
Surface mining drag lines, excavators, drills and haul trucks

Typical Properties

	Mobilgrease HTR	Mobilgrease HTM	Mobilgrease HTS	Mobilgrease HTF
NLGI Grade	0.5	1.5	2	1.0
Thickener Type	Li-Complex	Li-Complex	Li-Complex	Li-Complex
Color, Visual	Black	Black	Black	Black
Penetration, Worked, 25º C, ASTM D 217, mm/10	340	295	280	325
Dropping Point, ºC, ASTM D 2265	280	280	295	190
Viscosity of Oil, ASTM D 445 CSt @ 40º C	320	320	680	320
cSt @ 100º C	24	24	37	24
Penetration Consistency Change, Roll Stability, ASTM D 1831, mm/10	-1	-1	-1	-1
Water Spray-Off, ASTM D 4049,% wt loss	-----	-----	-----	-----
Water Washout, ASTM D 1264, % Wt Loss	-----	5.5	5.5	-----
4-Ball Weld Point, ASTM D 2596, kg	315	315	315	315
4-Ball Wear, ASTM D 2266, mm scar	0.5	0.5	0.5	0.5

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

The Mobil logotype, the Pegasus design and Delvac are trademarks of ExxonMobil Corporation, or one of its subsidiaries.

Exxon Mobil Corporation
3225 Gallows Road
Fairfax, VA 22037

1-800-ASK MOBIL (275-6624)

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.