品牌专区 >> 低噪音润滑脂 >> Klüberpaste 46 MR 401
Klüberpaste 46 MR 401
| Klüberpaste 46 MR 401 详细说明 |
| Klüberpaste 46 MR 401 White multi-purpose lubricating paste The data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to a reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the selected product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a sample for testing. Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all the technical data in this product information at any time without notice. Klüber Lubrication, a member of the Freudenberg group Publisher and Copyright: Reprints, total or in part, are permitted if source Klüber Lubrication München KG Klüber Lubrication München KG is indicated and voucher copy is forwarded. Geisenhausenerstraße 7, 81379 München, Deutschland +49 89 7876-0, Telefax +49 89 7876-333, klueber.com Product information 5.150 en Edition 11.08, replaces edition 02.08 Article number: 005108 MA-TM/TP Description Klüberpaste 46 MR 401 is a whitish lubricating paste with a synthetic base oil, lithium soap and special solid lubricant additives. This paste is suitable for long-term and lifetime lubrication, as an assembly lubricant and for lubrication points subject to fretting corrosion. It has a wide service temperature range* from approx. –40 to 150 °C, shows neutral behaviour towards non-ferrous metals, many plastic materials and rubber, and has a good load carrying capacity. Application Klüberpaste 46 MR 401 is especially suitable as an assembly lubricant in press-on processes and as a thin-film lubricant for all friction points subject to very high pressure, low sliding speed, high wear, stick-slip, oscillating movements, vibrations and tribocorrosion. The paste’s application range includes: pressing in of pins and bolts, mounting of rolling bearings, wheels and flanges, lubrication of rolling and plain bearings operating at very low speeds, for threaded spindles, spline shafts and adjusting nuts to prevent running-in damage and stick-slip; for ball-andsocket joints, pin suspensions, screw connections, rotary shaft seals (O-ring seals, V-ring gaskets, collars) made of rubber materials to extend the service life. S = standard deviation 1 = for batches with batch no. > 628909 Application notes Before applying Klüberpaste 46 MR 401 it is important to clean the contact surfaces and remove any solvent residues with a lint-free, dry cloth. Klüberpaste 46 MR 401 can be easily applied to the entire surface in a thin layer with a spatula. It is important to avoid overlubrication. Before applying the paste to a plastic material we recommend carrying out a compatibility test. Minimum shelf life The minimum shelf life is approx. 36 months if the product is stored in its unopened original container in a dry place. Pack sizes 60 g tube 600 g cartridge 0.75 kg can 30 kg drum Material safety data sheets can be downloaded or requested via our website klueber.com. You may also obtain them through your contact person at Klüber. Klüberpaste 46 MR 401 • Whitish high-performance lubricating paste • Facilitates assembly and disassembly • Protects from running-in damage and prevents seizure • Has a very high load-carrying capacity • Improves lubrication in case of oscillating movements or vibrations – provides protection against tribo-corrosion • Is resistant to water and is not washed out • Provides good corrosion protection Product data1 Colour whitish Service temperature range*, °C, approx. -40 – 150 Base oil viscosity, DIN 51 562 pt. 01, at 40 °C, mm2/s 350 – 375 Drop point, DIN ISO 2176, °C > 185 Worked penetration at 25 °C, DIN ISO 2137, (ASTM D 217); 0.1 mm 300 – 340 Corrosion protection SKF-Emcor test, DIN 51 802, 1 week, distilled water, corrosion rating ≤ 1 Copper corrosion, DIN 51 811, after 24 h / 100 °C, corrosion rating 1 – 100 Four-ball test, welding force, DIN 51 350 Pt 4, N > 4600 Friction coefficients in first-time tightening, measured in screw connections M10x30-8.8, DIN EN ISO 4017, black, and nut M10-8, DIN EN ISO 4032, bright; number of screws: 20 μhead = 0.17 S=0.011 μthread = 0.15 S=0.024 * Service temperatures are guide values which depend on the lubricant’s composition, the intended use and the application method. Lubricants change their consistency, apparent dynamic viscosity or viscosity depending on the mechanodynamical loads, time, pressure and temperature. These changes in product characteristics may affect the function of a |
